Grinding Booth Operator
American Bath Group | Elizabethtown, Pennsylvania | Full-time, on-site, hourly
PAY: $19.00–$22.00 per hour
Position summary
The Grinding Booth Operator is a production-line position responsible for grinding and cutting all required areas around complete bathtubs, showers, and wall units. The operator measures and marks work, uses power tools and cutting equipment, moves and repositions units with carts and dollies, inspects completed work, and transfers finished units to the Finish Line. This role requires an active, proactive employee who can work safely and accurately while maintaining the pace of a fast-moving manufacturing line.
Essential duties and responsibilities
· Perform complete-unit grinding. Grind all required areas around the entire bathtub, shower, or wall unit, including assigned perimeter, edge, backing, and other areas required by the model or process.
· Measure and mark. Use a tape measure and the applicable dimensions or guides to locate and mark areas that require cutting or grinding.
· Set up the cutting table. Place and secure the tub or unit on the designated table, measure the required cut, and adjust the table or saw setup so the cut is made in the correct location.
· Cut and remove material. Use the cutting-table saw, Sawzall, grinders, drills, and other required power tools to complete assigned work while maintaining the intended dimensions and product profile.
· Control tool contact. Operate tools steadily and avoid incorrect cuts, over-grinding, gouging, cracking, excessive thinning, or damage to finished surfaces and structural features.
· Move and reposition units. Use carts and dollies to receive, transport, turn, and position large units safely, and protect each unit from shifting or contact damage.
· Inspect completed work. Confirm that all assigned areas are complete and that no sharp, rough, uneven, or excess material remains. Identify damage or questionable conditions before releasing the unit.
· Support production flow. Maintain the required line pace, transfer completed units to the Finish Line, and prevent avoidable backups while meeting safety and quality expectations.
· Communicate problems. Report incorrect measurements, defects, damaged tools, blocked flow, abnormal dust, or units that do not meet the standard.
· Maintain the work area. Keep tools, carts, dollies, hoses, cords, and materials organized and follow the established cleanup and waste-disposal process.
Tools and Equipment
Power tools - Hand grinders, drills, and other powered hand tools required for the assigned unit.
Cutting equipment - Cutting-table saw, adjustable cutting table or fixture, and Sawzall with the required blades.
Measurement - Tape measure and applicable model dimensions, marks, templates, or work instructions.
Material handling - Carts, dollies, cutting table or fixture, and approved unit supports.
Work area - Grinding booth, dust-control equipment, guards, hoses, cords, and cleanup equipment.
Quality and production expectations
· Complete coverage. Finish every required grinding and cutting area before transfer; do not leave assigned work incomplete.
· Measurement accuracy. Measure and mark before cutting, adjust the cutting table to the required dimension, and verify the setup before activating the saw.
· First-pass quality. Produce a clean, acceptable result without avoidable repeat grinding, product damage, or unnecessary handling.
· Line pace. Maintain a steady work rhythm that supports the production line and Finish Line without sacrificing safety or quality.
· Ownership. Stay active, anticipate the next unit, keep required tools and carts ready, and communicate constraints before they stop the line.
Required personal protective equipment (PPE)
The employee is required to wear the assigned PPE while performing Grinding Booth work and must follow the site requirements for proper use, care, and replacement.
Gloves
Respiratory Protection
Safety Glases
Hearing Protection
Required skills and work style
· Measurement. Read a tape measure accurately and apply required dimensions and marks to the unit and cutting-table setup.
· Power-tool operation. Safely use grinders, drills, the cutting-table saw, a Sawzall, and other required power tools.
· Attention to detail. Recognize incomplete grinding, rough or sharp areas, incorrect cuts, and tool-caused damage.
· Production readiness. Work continuously at the required line pace, remain active throughout the assignment, and prepare for incoming units without repeated prompting.
· Initiative and teamwork. Act proactively, coordinate unit movement with nearby employees, and communicate production, quality, and equipment concerns promptly.
· Instruction compliance. Follow model-specific work instructions, safety rules, quality standards, and supervisor direction.
Physical demands and work environment
This is a physically active production role performed in and around a grinding booth. The work has significant ergonomic demands because employees must repeatedly access different areas of large bathtubs, showers, and wall units. The employee must be able to perform the essential functions of the position, with reasonable accommodation where applicable.
· Movement and posture. Stand and move for extended periods; walk around large units; and repeatedly bend, stoop, crouch, reach across or around the product, and change body position to access required areas.
· Manual tool work. Grip, guide, and control power tools during repetitive grinding and cutting while managing vibration and maintaining stable body positioning.
· Lifting and carrying. Lift and carry up to 50 pounds, including wall panels, tools, and materials, and use team assistance when the size, weight, or shape of an item requires it.
· Unit handling. Using carts and dollies, push, pull, turn, position, tilt, and recline bathtubs, showers, and other units that average approximately 125 pounds and may weigh up to 200 pounds. The full unit weight is not manually lifted; the employee must apply the physical force needed to place or recline the unit on the cart and move it through the production area.
· Ergonomic exposure. Perform repetitive upper-body movements and work in low, extended-reach, or otherwise demanding postures based on the size and shape of the unit and the grinding location.
· Work environment. Work in a fast-paced manufacturing area with production traffic, airborne and settled dust, noise, vibration, and sharp or rough composite edges.
BENEFITS
- Medical, dental and vision coverage; life and disability insurance; Employee Assistance Program, Teladoc and Nurseline.
- 401(k) eligibility after 60 days; company-match eligibility after 90 days, up to a 2.25% match when contributing 6%, subject to plan terms.
- For typical hourly employees: 40 hours of vacation after six months, an additional 40 hours after one year, then 80 hours annually (120 hours at seven years); 40 hours of sick time after 90 days.
- Ten company-recognized holidays in 2026; holiday-pay eligibility after 30 days, subject to applicable policy and site scheduling.
INTERESTED?
Apply to join American Bath Group in Elizabethtown. We welcome people who take pride in dependable work, safety and doing the job right.
American Bath Group is an Equal Opportunity Employer. Qualified applicants will receive consideration without regard to protected status. Reasonable accommodations will be considered in accordance with applicable law.
Pay: $19.00 - $22.00 per hour
Expected hours: 40.0 – 50.0 per week
Benefits:
Application Question(s):
Work Location: In person